Collection: TAG Heuer Watch Repair Servicing Singapore | Heuer 02 Specialist
TAG Heuer Watch Repair & Servicing Singapore
Movement overhaul from S$350 — written quote before any work begins. We specialise in Heuer 02 in-house chronograph service — Carrera, Monaco, Aquaracer, and Formula 1 all serviced in-house. Walk in — no appointment needed. Open 7 days including weekends and public holidays.
TAG Heuer Models We Service
Every TAG Heuer reference welcome — from current Heuer 02 to vintage Heuer Carrera and Monaco.
Transparent Pricing
Written quote confirmed before any work begins. No surprises on collection.
- Full disassembly & ultrasonic cleaning
- Calibre 5 (ETA 2824) automatic
- Calibre 7 (ETA 2892) GMT
- Calibre 16 (ETA 7750) chronograph
- Worn parts replaced as needed
- Case & bracelet ultrasonically cleaned
- Pressure test included
- TAG Heuer Heuer 02 in-house calibre
- Column wheel chronograph mechanism
- Vertical clutch system verified
- 80-hour power reserve confirmed
- Carrera & Monaco (Heuer 02) covered
- Pressure test included
- Battery replacement — Formula 1, Aquaracer quartz
- Sapphire crystal replacement — quoted on model
- Crown & stem repair or replacement
- Caseback gasket replacement
- Bracelet & strap sizing or replacement
- Pressure test after crystal / crown work
What We Service
Heuer 02 chronograph, ETA-based automatics, Aquaracer divers, vintage Heuer — all done in-house.
Introduced in 2017, the Heuer 02 is TAG Heuer's first fully in-house chronograph calibre since the 1970s. It features a column wheel, vertical clutch, and 80-hour power reserve. The column-wheel mechanism requires specific expertise to service correctly — we handle the Heuer 02 in-house and verify chronograph function across all positions after reassembly.
The majority of TAG Heuer references run ETA movements: Calibre 5 (ETA 2824 automatic), Calibre 7 (ETA 2892 GMT), Calibre 16 (ETA 7750 chronograph), and Calibre 17 (ETA 2894). These are robust, well-supported movements that service cleanly. From S$350.
Aquaracer Professional 300 is rated to 300m. We replace all crown and caseback gaskets and pressure-test to rated depth after every service. Opening the case for any reason breaks the factory seal — pressure testing is non-negotiable before the watch goes near water again.
The Carrera and Monaco are the two flagship TAG Heuer lines. Current references run the Heuer 02; older references use the ETA 7750 (Calibre 16) or ETA 2894 (Calibre 17). We service all generations — quote depends on which calibre and complication is fitted. Vintage Carrera (Cal 12) and Monaco accepted.
Vintage Heuer — pre-TAG acquisition references — are among the most collectable sports chronographs made. Heuer Carrera (Cal 12), Monaco (Cal 11), and Autavia (Cal 12/15) are all serviceable with parts available through specialist networks. Price on assessment.
Walk in with your TAG Heuer — our watchmaker identifies the calibre, checks movement condition, and inspects the case at no charge. Written quote confirmed before any work begins. No commitment required.
Our 10-Step TAG Heuer Servicing Process
Every TAG Heuer goes through the same thorough process — from initial assessment to final pressure test.
Initial Assessment
Calibre identified — Heuer 02, ETA-based, or vintage. Complications noted. Movement, case, crystal, and bracelet condition assessed. Written quote before we open anything.
Pre-Service Pressure Test
We test existing water resistance before opening the case — important for Aquaracer owners. Tells us the condition of current crown and caseback seals.
Movement Disassembly
The movement is fully disassembled. For Heuer 02 chronographs, column wheel and clutch components are separated and catalogued. Every part sorted by sub-assembly for inspection.
Ultrasonic Cleaning
All metal components ultrasonically cleaned in specialist watch cleaning solution. Dried lubricant, dust, and debris removed from surfaces no tool can reach.
Component Inspection
Every part examined under magnification. Heuer 02 column wheel condition, pallet stones, pivot wear, and jewel condition assessed. Worn or damaged parts replaced.
Lubrication & Reassembly
Each component receives the correct lubricant. Heuer 02 chronograph mechanism reassembled and column wheel verified. Movement assembled to manufacturer specification.
Timing Regulation
Balance regulated on a timing machine across multiple positions. Standard ETA movements regulated to ±10 sec/day. Chronograph function tested across start, stop, and reset.
Case & Bracelet Cleaning
Case, caseback, and bracelet ultrasonically cleaned. Polishing available on request — we advise on suitability for your reference before proceeding.
Gasket Replacement & Reassembly
Crown and caseback gaskets replaced as standard. Case reassembled with correct torque. This restores factory water resistance before pressure testing.
Post-Service Pressure Test
Aquaracer Professional 300 tested to 300m. All other models tested to their rated rating. Result shown to you at collection. If it fails, we fix the cause before return.
⚡ Too Busy to Visit? Send Your TAG Heuer via Grab
Book a Grab delivery driver to bring your TAG Heuer to us during opening hours (1:30PM–7PM daily). WhatsApp us first so we're ready to receive it.
Why Choose watchrepair.com.sg for Your TAG Heuer
Six reasons TAG Heuer owners in Singapore trust us with their watches.
TAG Heuer's in-house column-wheel chronograph serviced in-house — not outsourced. Column wheel geometry and vertical clutch verified after every reassembly.
Free assessment. Written quote confirmed. You approve before anything is opened. No surprises on collection.
Crown and caseback gaskets replaced as standard. Aquaracer Professional 300 pressure-tested to 300m after every service. Result shown to you before you leave.
Vintage Heuer Carrera (Cal 12), Monaco (Cal 11), and Autavia accepted. We source parts through our specialist network and handle vintage Heuer regularly.
People's Park Complex #03-62, 1 minute from Chinatown MRT Exit C. Daily 1:30PM–7PM including weekends and public holidays.
Authorised TAG Heuer service centres typically quote 3–6 months. Our turnaround is 10–18 working days at significantly lower cost.
watchrepair.com.sg vs. Authorised TAG Heuer Service Centre
✅ watchrepair.com.sg
❌ Authorised TAG Heuer Centre
Frequently Asked Questions
Common questions about TAG Heuer watch repair in Singapore.
How much does TAG Heuer watch repair cost in Singapore?
TAG Heuer watch repair starts from S$350. ETA-based automatics (Calibre 5, Calibre 16) from S$350. Heuer 02 in-house chronograph (Carrera, Monaco) quoted after assessment. Battery replacement from S$25. Written quote confirmed before any work begins.
How long does TAG Heuer servicing take in Singapore?
Movement overhaul takes 10–18 working days. ETA-based automatics (Calibre 5, 7): 10–14 working days. ETA 7750 chronograph (Calibre 16): 10–14 working days. Heuer 02 chronograph: 14–18 working days. Battery while you wait.
How often should I service my TAG Heuer?
Every 5–7 years for mechanical TAG Heuer watches. Singapore's humidity accelerates lubricant degradation, so 5 years is the safer interval. Signs it needs service: losing more than ±15 sec/day, stiff crown, reduced power reserve, or moisture under the crystal.
What is the Heuer 02 and why does it need specialist service?
The Heuer 02 is TAG Heuer's in-house column-wheel chronograph with 80-hour power reserve, introduced in 2017. Unlike ETA-based movements, the Heuer 02's column wheel and vertical clutch require specific knowledge to service correctly. We handle the Heuer 02 in-house and verify all chronograph functions after reassembly.
Which TAG Heuer calibres can you service?
We service all TAG Heuer calibres: Heuer 02 (in-house chronograph), Calibre 5 (ETA 2824), Calibre 7 (ETA 2892 GMT), Calibre 16 (ETA 7750), Calibre 17 (ETA 2894), Calibre 36 (automatic), all quartz calibres, and vintage Heuer calibres including Cal 12 and Cal 11.
Which TAG Heuer models do you service?
Carrera (Heuer 02 and Calibre 5), Monaco (Heuer 02 and vintage), Aquaracer Professional 300 and 200, Formula 1, Link, Autavia, Monza, and all vintage Heuer references including the original Carrera, Monaco (Cal 11), and Autavia.
Can you pressure test my TAG Heuer Aquaracer?
Yes — and we do it as standard after every service. Aquaracer Professional 300 tested to 300m. We replace all crown and caseback gaskets and show you the result at collection. If the test fails, we fix the cause before return at no extra charge.
Are you an authorised TAG Heuer service centre?
No — we are an independent workshop. For watches under warranty, contact TAG Heuer directly. For out-of-warranty watches, independent service delivers professional quality at significantly lower cost with turnaround of 10–18 working days versus 3–6 months at authorised centres.
Where are you located and what are your opening hours?
People's Park Complex #03-62, 1 Park Road, Singapore 059108. 1-minute walk from Chinatown MRT Station Exit C. Open daily 1:30PM–7:00PM including weekends and public holidays. No appointment needed.
Visit Us at People's Park Complex
1 Park Road, Singapore 059108
-
TAG Heuer Watch service Near Me
Regular price $350.00 SGDRegular priceUnit price per -
TAG Heuer Battery Replacement Singapore | Instant & Waterproof
Regular price $20.00 SGDRegular priceUnit price per -
TAG Heuer Watch Repair & Servicing Singapore
Regular price $350.00 SGDRegular priceUnit price per -
TAG Heuer Repair and Servicing | Expert Repairer in Singapore
Regular price $350.00 SGDRegular priceUnit price per -
TAG Heuer Service Price Singapore
Regular price $350.00 SGDRegular priceUnit price per -
Tag Heuer watch repair full service
Regular price $350.00 SGDRegular priceUnit price per
